Pages

May 6, 2010

Kenwood TS-530 Modifications

MODIFICATION FOR THE KENWOOD TS-530
----- WARC BANDS

AS SUPPLIED, THE TS-530 WILL RECEIVE BUT NOT TRANSMIT ON THE
THREE NEW WARC BANDS.  IF TRANSMIT CAPABILITY IS DESIRED,
A MINOR WIRING CHANGE IS REQUIRED.. THERE ARE JUST TWO MINOR CHANGES THAT
COULD BE MADE AND THEY ARE AS FELLOWS .......

1 --- FOR ALL 3 BANDS . BREAK THE LINE BETWEEN THE RF UNIT
X44-1360-01 CONNECTOR #6, PIN #1 (TOP TERMINAL) AND
AF UNIT X49-1150-00, CONNECTOR #7, PIN #4 (TOP TERMINAL).

2 --- OR, FOR INDIVIDUAL BANDS. ON THE RF UNIT X44-1360-01:

BAND          REMOVE/CUT
----------------------------------------
10 MHZ          D4
18 MHZ          D5
24.5 MHZ        D6

----------------------------------------------------------------------------
Note: I haven't tried or verified this, proceed at your own risk.
Post a Comment